Multi branch chain slings are available in double leg
chain slings, triple leg chain slings & quadruple leg chain slings.
These are available with oblong link/round rings, standard eye hook, grab
hooks, foundry hooks, clevis hooks, swivel type and eye self locking hooks.
Chain Slings with plate lifting clamps are also available. All our chain
slings are supplied with test certificate from government approved test
house for the safe working load and proof load testing as per IS: 2760-1980.
PRECAUTIONS FOR CARE & SAFE USE
Although chain slings are designed for rugged, lasting service,
precautions should be observed to extend the
product's life. Certain hazards are inherent in the operation of chain
slings and users must exercise care and common sense to ensure a safe
working environment. Please practice the following safe work
TO ORDER CHAIN SLINGS
- Never exceed the working load limit of a chain sling.
- All fittings and attachments must have a working load limit (WLL)
equal to or greater than that of the chain; if not, the assembly must be
rated at the WLL of the weakest component.
- Do not rest or dump load on chain.
- Remove all twists, knots or kinks before lifting.
- Seat load properly within throat opening and centered in bowl of the
- Balance load to avoid undue stress on one leg of multi-leg slings.
- Never bounce, jerk or shock load a sling when lifting or lowering
- Remove slack by slowly applying the load to the chain.
- Use pads around sharp corners.
- Never force or hammer hooks or chain into position.
- Never anneal alloy chain slings & Do not use in acid solutions.
- Avoid extreme temperatures (under 20 degrees F or over 350 degrees
- Clean and inspect chain slings regularly & Protect chain
- Store chain slings in a clean, dry area, preferably by hanging on
- Determine the maximum load to be lifted.
- Choose the proper type of chain sling (single, double, etc.) dictated
by the size, shape and weight of the load.
- Estimate the approximate angle between a leg of the sling and the
load during operation.
- Select the proper attachment (hooks and master links) for your chain
- Determine the overall reach from bearing point on master link to
bearing point on attachment.
- Refer to the Working Load Limit Chart and to your predetermined angle
of the type sling you have selected.
- Choose the chain size which meets your requirements.
- When entering your order be sure you give complete information as to
the size, reach and attachments required.
Gd-100 & Gd-120 Chain Slings
Gd-100 Chain Slings
We have range of grade-100 Industrial Chains for
Overhead Lifting We offer widest range of PEWAG Grade- 100 chains, Slings
- 5% higher capacity than Grade-80 Chains
- Approximately 30% weight saved resulting in easier handling
- Better Price/Performance ratio
- Higher wear resistance Longer Life
- Easy identification- Every link is marked
- All chains & components with distinctive tags with precise
Gd-120 Chain Slings
50% Higher Work Load Limit
Grade-120 offers +50% higher WLL over grade-80 allowing a down size of
The downsizing of the chain results in lower weights of chain slings.
Higher Wear Resistance
Due to the special form of the profile chain, a larger contact is achieved
between the bearing surfaces of the links. This, in turn, reduces the
surface pressure on the chain and consequently reduce wear substantially.
This is a real advantage in abrasive environments.
The new profile of the Grade-120 Chain has up to 38% higher moment of
resistance compared to round link chains with the same diameter, therefore,
the chain can withstand bending force better than round link chains
and is well equipped for heavy applications.
Higher Safety Factor
With same dimension of chain and workload, Grade-120 offers a safety factor
of 6:1 compare to Grade-80 with 4:1
Color-Coded Corrosion Protection
Grade-120 has a powder coated finish in blue, which provides easy
identification and corrosion protection.
Exceed the 4:1 NACM safety factor if G-80 loading is used
Meets the NACM standard for heat resistance with 400°
Meets the 20,000 cycle ASTM-Standard fatigue test for