VERTICAL PLATE LIFTING CLAMPS (DSQ TYPE)
Vertical plate lifting clamps are made of high-tensile steel, excellent in hardness and strength. These clamps have hardened steel jaws for grip. These are used for lifting, handling steel sheets, plates etc in vertical position. These clamps are widely being used in various industries. Main advantages of these vertical plate lifting clamps are:-
• Very easy to operate
• Substantially cost saving and reduce the working time
• Increased working safety
• Increased work efficiency
• Available in capacity range WLL 1 Ton to 10 Ton
Capacity
WLL (Ton)
| Steel Plate Thickness | Opening | Approx. Weight (Kg) |
| 1 | 0 – 16 mm | 0 - 20 mm | 2 |
| 2 | 0 – 22 mm | 0 – 25 mm | 8 |
| 3 | 5 – 30 mm | 0 – 25 mm | 15 |
| 5 | 16 – 50 mm | 0 – 30 mm | 21 |
| 10 | 40 – 80 mm | 0 – 45 mm | 34 |
Check the capacity of clamp. Right type of chain sling should be used with proper length and size. Load should be lifted at centre of gravity and ensure that plate or sheet inserted up to full depth. if the plate is longer than one meter in length then lift at two points and if it is hard to locate the centre of gravity lift the load at 3-4 points.Check the plate lift clamp before every use for the flaws or distortion/damages
Capacity
WLL (Ton)
| Plate Admit | Throat Depth | Body Dia | Cam Dia | Approx. Weight |
| 1 | 0 – 28 mm | 105 mm | 12 mm | 16 mm | 9 Kg |
| 2 | 0 – 28 mm | 105 mm | 16 mm | 16 mm | 12 Kg |
| 3 | 0 - 45 mm | 130 mm | 19 mm | 19 mm | 22 Kg |
| 5 | 16 – 50 mm | 130 mm | 25 mm | 25 mm | 35 Kg |
| 10 | 0 - 80 mm | 185 mm | 28 mm | 32 mm | 85 Kg |
DISCARD
1. Discard if the obvious flaw or distortion is found in the main body
2. When clearance between bolt and hole exceeds 1 mm
3. Deflection of cam or shackle becomes excessive
HORIZONTAL PLATE LIFTING CLAMPS
These horizontal plate lifting clamps are used in pairs and are ideal for moving plates/sheets material in horizontal position. The grip of the clamp is made cut of hardened steel to prevent the clamp from slipping off the load. Horizontal plate lifting clamps firmly grasps plates so that it can be lifted in the horizontal position. Jaw of the clamps can be supplied with serrated teeth or smooth finish as per specific requirement. We have both indigenous designed horizontal clamps as well as imported DHQ type horizontal clamp.
| CAPACITY IN TONES | JAW OPENNG ‘X’ | PLATE ADMIT ‘Y’ | BODY DIA ‘Z’ | CAM DIA | RING SIZE
d X D
| WEIGHT PER PAIR KGS |
PAIR
| EACH |
| 1 | 0.5 | 50 | 150 | 40 | 16 | 16 X 75 | 12 |
| 2 | 1 | 60 | 170 | 45 | 16 | 20 X 85 | 13.5 |
| 3 | 1.5 | 70 | 200 | 55 | 20 | 22 X 95 | 28.5 |
| 5 | 2.5 | 90 | 270 | 63 | 25 | 25 X 95 | 40 |
| 10 | 5 | 95 | 300 | 90 | 32 | 32 X 135 | 78 |
| 20 | 10 | 150 | 400 | 120 | 40 | 45 X 200 | 160 |
PIPE LIFTING CLAMPS
Pipe lifting clamps, hooks are designed for efficient and easy handling of steel pipes. These pipe lifting clamps are available with /without rubber coating. Teflon pads are provided to protect the edges of pipe from damage. These are available in capacity range 3 ton, 5 ton and 10 ton in pair.
